Reno 4ft LED T8 Tube - 14W | 4000K | 120-347V AC | Double Ended
CA$11.59
In stock
SKU
T-1047
Model: WLL-LEDT8BP14DV/840(4FT) | 120-347V AC | 14W | 4000K | Size: 4ft
Converting a fluorescent fitting to run without its ballast? The Reno WLL-LEDT8BP14DV/840(4FT), R41126, is a 14W Type B tube with 2200 lumens of 4000K light. It is intended for a ballast-bypass conversion of a suitable 4ft fitting.
A serviceable troffer or a strip fixture with G13 sockets can remain part of the installation when it is suitable for the conversion. This is useful above a workbench or in an office refit where the housing is being retained but the old ballast is being removed from service. The fitting’s diffuser or reflector still determines how the lamp output is distributed.
Installation requires the ballast to be disconnected and the fitting rewired according to the lamp instructions. For the double-ended arrangement, the supported supply is 120–347V; 347V must use double-ended wiring. Confirm the lampholder arrangement against the supplied diagram. This lamp is a wired retrofit option, not a plug-in replacement operating through the old ballast.
| Brands | Reno LED Lighting |
|---|---|
| Color Temperature | 4000K |
| CRI | 83 |
| Power Factor | 0.9 |
| Life Hours | 50,000 |
| Wattage | 14W |
| Lumens | 2200 lumens |
| Voltage | 120-347V AC |
| Equivalent Wattage | 32W |
| Product | LED T8 |
| Color | Natural White |
| MPN ( Part No.) | WLL-LEDT8BP14DV/840(4FT) |
| Beam Angle | 330 degree |
| Warranty | 5 Years |
| Length | 50 in. |
| Height | 6 |
| Net Weight | 1.3 |
| Width | 6 |
Write Your Own Review