This handheld infrared remote configures the Etlin-Daniels SENPIR-HLB-D high- and low-bay occupancy sensor from floor level. It is useful when several compatible sensors need the same settings or when their DIP switches are difficult to reach.
The remote stores up to four profiles and can set brightness, detection sensitivity, hold time, daylight response and standby settings. Aim it at the compatible sensor and use the send function described in the manual. Its stated transmission range is up to 15 metres under suitable conditions; it does not connect directly to the lighting load.
Power the remote with two AAA 1.5V batteries; alkaline batteries are preferred. Battery inclusion in the sales package is not established. Remove the batteries if the remote will not be used for 30 days. The sensor supports basic DIP-switch adjustment without this optional remote, which is sold separately.
| Brands | Etlin-Daniels |
|---|---|
| Product | Sensor/Photocontrol Accessories |
| MPN ( Part No.) | RC-SENPIR-HLB |
| Input Voltage | 2 x AAA 1.5V batteries |
| Feature | IR configuration for SENPIR-HLB-D;up to 15m transmission;up to 4 stored profiles;AAA battery inclusion unverified |
| Color | Black |
| Pack Quantity | 1 |
| Length | 123 mm |
| Height | 20.3 mm |
| Width | 70 mm |