Satco LED PL Replacement Bulb - 9W | 3000K | G24d | 2-pin
CA$19.19
Out of stock
SKU
T-2398
Model: 9WPLV/LED/830/DR/2P (S9862) | 120-277V AC | 9W | 3000K | Base: G24d
The Satco LED PL Replacement Bulb, model 9WPLV/LED/830/DR/2P (S9862), is specified at 9W, 3000K. This model is an LED lamp for a compatible pin-base fitting, with the listed G24D interface. Match the holder keying and lamp orientation in the existing downlight or compact fluorescent fitting. A existing lighting scheme with warm white lamps can retain that colour direction with this 3000K lamp. At 900 lumens, this model can be compared by light output when planning the area served by the fitting; the final appearance depends on the fitting and its placement. Use switched operation for this non-dimmable version.
This version lists length 4-11/16 in. Those measurements help check physical fit at the lamp space. The operating circuit for this model must match the manufacturer’s lamp instructions; pin count alone does not determine the ballast or direct-wire arrangement.
Buying tip: Check the existing socket for the G24D base and compare the available clearance with the lamp dimensions.
| Brands | Satco |
|---|---|
| Color Temperature | 3000K |
| CRI | 82 |
| Power Factor | 0.8 |
| Dimmable | NO |
| Life Hours | 50,000 |
| Wattage | 9W |
| Lumens | 900 lumens |
| Voltage | 120-277V AC |
| Equivalent Wattage | 26W CFL PL |
| Product | LED PL LAMP |
| Color | Warm White |
| MPN ( Part No.) | 9WPLV/LED/830/DR/2P (S9862) |
| Beam Angle | 120 degree |
| Base Type | G24D |
| Warranty | 5 Years |
| Length | 4-11/16 in. |
Write Your Own Review