This traditional LED wall pack provides selectable 80/100/120W output for exterior walls, entrances and service areas. Choose 3K, 4K or 5K to suit the site. The brown die-cast aluminum housing has a glass cover and measures 339 x 250 x 141 mm.
A built-in photocell switches the light according to ambient daylight; its on/off selector lets the installer disable that function when another control strategy is used. The driver accepts 120–347V AC and supports separate 0–10V dimming control wires. The specified 125 lm/W is efficacy, not total fixture lumens.
Mount the rear plate securely at the wall junction box, use the support wire while making connections, set wattage and colour temperature, and refit the fixture. Seal the gap between the wall and fixture with waterproof sealant as required by the installation instructions. The IP65 wet-location rating depends on completing that sealing step.
The specification lists a 70° x 110° distribution, CRI above 70, a -40°C to 40°C operating range, 50,000-hour rated life and a 5-year warranty. Sold as one fixture.
| GTA Delivery Only | No |
|---|---|
| Brands | Ortech |
| Color Temperature | 3K/4K/5K |
| CRI | >70 |
| Dimmable | YES |
| Life Hours | 50000 |
| Wattage | 80/100/120W selectable |
| Voltage | 120-347V AC |
| Operation Temp. | -40°C to 40°C |
| Color | Brown |
| MPN ( Part No.) | WP120-3CCT+W |
| Built-in Photocell | Yes |
| Beam Angle | 70° x 110° |
| Rating | IP65 |
| Pack Quantity | 1 |
| Warranty | 5 Years |
| Feature | Built-in photocell with disable switch; 0-10V dimming; wet location; glass cover |
| Length | 339 mm |
| Height | 141 mm |
| Width | 250 mm |