This selectable LED area light uses a Type III distribution for parking areas, access roads and other outdoor perimeter lighting. Choose 70W, 100W or 150W and 3K, 4K or 5K at the fixture. The optical lens can be repositioned following the manufacturer procedure to suit the planned light distribution.
The brown cast-aluminum fixture measures 404 x 250 x 65 mm. It accepts 120–347V AC, 50–60Hz and separate 0–10V dimming control wires. The driver includes 6kV surge protection. One shorting cap is included; photocell and motion-sensor accessories are sold separately. Any selected sensor must also suit the installation environment.
Choose a compatible mounting accessory separately: SB-POLE-M1, SB-POLE-M2, SB-TRUNNION-1, SB-YOKE-1 or SB-SLIP FITTER. Match the pole or mounting surface to that bracket and the manufacturer installation drawing. Secure the mount, route and connect wiring, set the desired output and replace all waterproof covers. Pole strength, aiming and spacing require a site-specific lighting design.
The specification lists IP65 wet-location use, CRI of 80, 130 lm/W efficacy, a -20°C to 40°C operating range and 50,000-hour rated life. The exact manufacturer product page states a 5-year warranty. Sold as one fixture.
| GTA Delivery Only | No |
|---|---|
| Brands | Ortech |
| Color Temperature | 3K/4K/5K |
| CRI | 80 |
| Dimmable | YES |
| Life Hours | 50000 |
| Wattage | 70/100/150W selectable |
| Voltage | 120-347V AC |
| Operation Temp. | -20°C to 40°C |
| Color | Brown |
| MPN ( Part No.) | SB150-3CCT+W |
| Built-in Photocell | No |
| Rating | IP65 |
| Pack Quantity | 1 |
| Warranty | 5 Years |
| Feature | Type III distribution; mounts and sensors sold separately; shorting cap included; 6kV surge protection |
| Length | 404 mm |
| Height | 65 mm |
| Width | 250 mm |
| Integrated Sensor | No |