This 2-inch black gimbal LED downlight directs ceiling light toward walls, displays and selected areas in halls, homes, offices, shops and cafes. It uses 8W on 120V AC and provides 650 lumens with a 38° beam and CRI 90. The adjustable light source offers 30° tilt and 360° rotation.
Select 2.7K, 3K, 3.5K, 4K or 5K before completing installation. The light and remote driver are included. Install directly into the ceiling with the spring clips; a separate recessed housing is not required.
Use a 72 mm ceiling cutout. The fixture drawing shows a 86 mm overall diameter and 78.8 mm overall height, with a separate 97.6 x 58.5 x 38.5 mm driver box. Allow room for the driver and route the wiring as shown in the manual. The installer supplies the cable connector. Mounting plates and extension cords are separate accessories.
The aluminum fixture is IC rated and airtight for indoor use in wet locations, with IP54 protection. TRIAC/ELV dimming from 100% to 10% with a compatible dimmer. Rated life is 50,000 hours, operating temperature is -20°C to 40°C, and the manufacturer warranty is 5 years. Disconnect power before installation or maintenance and follow the complete wiring instructions.
| GTA Delivery Only | No |
|---|---|
| Brands | Ortech |
| Color Temperature | 2.7K/3K/3.5K/4K/5K |
| CRI | 90 |
| Dimmable | YES |
| Life Hours | 50000 |
| Wattage | 8W |
| Lumens | 650 lm |
| Voltage | 120V AC |
| Operation Temp. | -20°C to 40°C |
| Color | Black |
| MPN ( Part No.) | SLIM2TRG-5CCTBK |
| Beam Angle | 38° |
| Rating | Wet Location |
| Pack Quantity | 1 |
| Warranty | 5 Years |
| Feature | 30° tilt and 360° rotation; driver included; IC rated; airtight; cutout 72 mm |
| Length | 86 mm |
| Height | 78.8 mm |
| Width | 86 mm |