This 4ft LED vapour-tight fixture is suitable for workshops, warehouses and underground parking areas where a sealed linear light is needed. The 125 mm wide housing and latched diffuser provide IP66 protection, and the fixture is rated for wet locations. The operating range is -20°C to 40°C.
Select 40/50/60W and 3.5K, 4K, 5K before closing the fixture. Input is 120-347V AC with 0-10V dimming. The body measures 1200 x 125 x 88 mm. The specification lists at least 130 lm/W efficacy; no unverified lumen value has been calculated. This version is supplied without the integrated motion sensor.
For surface installation, fix the mounting clips to a suitable substrate and snap the housing into the clips. Open the latches to access the wiring and selection switches, then refasten all clips. For suspension, use the separately purchased VT-SUS-KIT aircraft-cable kit and connect it to the mounting clips as shown in the manual. The suspension kit is not included with the light.
Rated life:50,000 hours. Manufacturer warranty:5 years. Sold individually. Match any dimmer to the manufacturer compatibility guide and the 0-10V control wiring.
| GTA Delivery Only | No |
|---|---|
| Brands | Ortech |
| Color Temperature | 3.5K/4K/5K |
| Power Factor | >0.9 |
| Dimmable | YES |
| Life Hours | 50000 |
| Wattage | 40/50/60W |
| Voltage | 120-347V AC |
| Operation Temp. | -20°C to 40°C |
| MPN ( Part No.) | VT-W60-3CCT+W |
| Beam Angle | 120° |
| Rating | IP66 |
| Pack Quantity | 1 |
| Warranty | 5 Years |
| Feature | ≥130 lm/W efficacy; wet location; 0-10V dimming |
| Length | 1200 mm |
| Height | 88 mm |
| Width | 125 mm |
| Integrated Sensor | No |