This 4ft LED vapour-tight fixture is suitable for workshops, warehouses and underground parking areas where a sealed linear light is needed. The 125 mm wide housing and latched diffuser provide IP66 protection, and the fixture is rated for wet locations. The operating range is -20°C to 40°C.
Select 40/50/60W and 3.5K, 4K, 5K before closing the fixture. Input is 120-347V AC with 0-10V dimming. The body measures 1200 x 125 x 88 mm. The specification lists at least 130 lm/W efficacy; no unverified lumen value has been calculated. This version includes a microwave sensor for motion detection, dimmed standby and daylight control. Set the sensor DIP switches for the space and test the detection area after installation.
For surface installation, fix the mounting clips to a suitable substrate and snap the housing into the clips. Open the latches to access the wiring and selection switches, then refasten all clips. For suspension, use the separately purchased VT-SUS-KIT aircraft-cable kit and connect it to the mounting clips as shown in the manual. The suspension kit is not included with the light.
The installation manual calls for at least one metre between sensor-equipped fixtures to limit interference. Keep the detection area clear and verify operation in the actual installed position.
Rated life:50,000 hours. Manufacturer warranty:5 years. Sold individually. Match any dimmer to the manufacturer compatibility guide and the 0-10V control wiring.
| GTA Delivery Only | No |
|---|---|
| Brands | Ortech |
| Color Temperature | 3.5K/4K/5K |
| Power Factor | >0.9 |
| Dimmable | YES |
| Life Hours | 50000 |
| Wattage | 40/50/60W |
| Voltage | 120-347V AC |
| Operation Temp. | -20°C to 40°C |
| MPN ( Part No.) | VT-W60MS-3CCT+W |
| Beam Angle | 120° |
| Rating | IP66 |
| Pack Quantity | 1 |
| Warranty | 5 Years |
| Feature | Integrated microwave sensor; ≥130 lm/W efficacy; wet location; 0-10V dimming |
| Length | 1200 mm |
| Height | 88 mm |
| Width | 125 mm |
| Integrated Sensor | Yes |