Use this 50 m RGB LED tape reel for adjustable colour accents along displays, coves and architectural outlines. The matching controller allows a fixed colour or colour-changing effects. Power is rated at 2–10W per metre, depending on operation; a single white-light lumen rating is not specified for the changing RGB output.
The strip operates at 120V AC and has 60 LEDs per metre with a 120° beam. Cut only at the marked 1 m intervals. The strip profile is approximately 16 mm wide by 8 mm high. Fully unroll the reel before energizing it and follow the manufacturer’s supported mounting and connection instructions.
The separately sold REMOTE50M-SLRGB controller and remote package supports up to 50 m of this strip at 120V. Use the matching four-pin RGB50M straight, L or T connectors where joints are needed; the two-pin white-strip components are a different interface. End caps and sealing materials are also separate.
The strip is Non-IC and rated IP67 for indoor or outdoor dry, damp and wet locations. Seal end caps, power connections and intermediate joints as directed for outdoor installations. The strip rating does not establish the controller’s environmental rating or make an unsealed joint waterproof. Do not use for prolonged underwater exposure. Rated life is 50,000 hours and operating temperature is -30°C to 40°C.
| GTA Delivery Only | No |
|---|---|
| Brands | Ortech |
| Color Temperature | RGB |
| Dimmable | YES |
| Life Hours | 50000 |
| Wattage | 2–10W/m |
| Voltage | 120V AC |
| Operation Temp. | -30°C to 40°C |
| MPN ( Part No.) | SL-RGB50M |
| Beam Angle | 120° |
| Rating | Wet Location |
| Pack Quantity | 1 |
| Feature | RGB; 50 m reel; 1 m cut interval; IP67; controller sold separately |
| Length | 50000 mm |
| Height | 8 mm |
| Width | 16 mm |