This plug-and-play microwave sensor adds motion detection and bi-level dimming to compatible Ortech luminaires with the correct sensor receptacle. It uses a 3.5 mm jack and a nominal 12V DC supply, with a specified 10-15V DC range. It is a low-voltage control component, not a device for direct connection to mains voltage.
Use the separately purchased PNP-REMOTE to set detection area, hold time, daylight threshold, standby dimming and standby time. Detection-area choices are 25%, 50%, 75% and 100%; standby levels are 10%, 20%, 30% and 50%. The sensor operates at 5.8GHz ±75MHz. Maximum mounting height is 12m, with actual detection depending on mounting position and movement.
The sensor head is 53.98 mm in diameter and 41.1 mm overall including the plug. Keep its face exposed to the detection area rather than inside a metal enclosure. The manufacturer recommends indoor use because open or partly open outdoor environments may trigger the microwave sensor. Allow at least 2m between sensors and 1.5m from wireless equipment, and avoid vibration or ventilation outlets.
Compatible fixture, receptacle and remote are sold separately. Verify the exact luminaire interface before ordering. Operating range:-20°C to 60°C. Manufacturer warranty:5 years.
| Brands | Ortech |
|---|---|
| MPN ( Part No.) | PNP-SENSOR |
| Voltage | 12V DC nominal; 10-15V DC |
| Pack Quantity | 1 |
| Height | 41.1 mm |
| Width | 53.98 mm |