This black security-light sensor controls a separately wired lighting load using PIR motion detection and daylight sensing. It operates at 120V AC, 60Hz and supports up to 150W of LED drivers or LED bulbs, or up to 500W of incandescent lamps. The sensor is a control accessory and does not include a light source.
The maximum motion-detection range is 50 ft with a detection angle up to 180°. Sensitivity and delay are adjustable, with test operation and a delay range from 5 seconds to 20 minutes. Motion response depends on mounting height, direction of travel and site conditions.
Choose motion-only night operation, automatic operation, a three-hour full-light period followed by sensing, or photocell dusk-to-dawn operation. The automatic mode maintains 30% light output between detections only when used with compatible dimmable bulbs or fixtures. Wall-switch override can keep the light on for the night, with motion operation returning the following night.
Mount on a wall or ceiling/soffit using a standard metal junction box. Recommended mounting height is 6.5-10 ft. The package includes the mounting crossbar, gasket, screw cover, stainless screw, three wire nuts and two mounting screws. The junction box, light and silicone sealant are separate. Seal the plate perimeter as shown in the installation guide.
The assembly measures 117 x 117 x 135 mm. It is IP65 and wet-location rated, operates from -30°C to 50°C and carries a 5-year manufacturer warranty. Position the sensor away from heat exhausts and other light sources that can affect detection.
| Brands | Ortech |
|---|---|
| MPN ( Part No.) | SSL-SO-BK |
| Voltage | 120V AC 60Hz |
| Feature | PIR motion detection; dusk-to-dawn photocell; up to150W LED or500W incandescent; IP65; Product: Outdoor PIR security-light sensor |
| Color | Black |
| Size | 117 x117 x135 mm |
| Pack Quantity | 1 |