Reno LED Flood Light - 75W Max | 3-CCT

Reno LED Flood Light (RENO-FL-MCCT-DV-KN-R3) is the 30W/55W/75W / 3-CCT version. This model is an option to assess for light aimed at a defined surface or area in a targeted lighting project; the surrounding layout determines the positions and quantity required.

The bracket or support chosen for this model must suit its mounting interface, with aiming assessed from the actual installation position. This version is specified for 120-347V AC; that rating is part of the selection when replacing an existing fitting. For the fixture location layout, allow for the listed length 6.75 in., width 2.00 in., height 9.75 in. and the installation clearances required by its instructions. The 3000K/4000K/5000K colour selection lets the installer coordinate the light with surrounding fixtures instead of committing the whole space to one fixed tone. The selectable 30W/55W/75W configuration supports adjustment during setup so the same fixture need not run at its highest setting everywhere.

Buying tip: Confirm the supplied mount fits the pole or junction box, then check the beam pattern against the area to be lit.