Reno DECO LED 16-inch Double Ring Ceiling Light - Integrated Microwave Sensor

The Reno DECO LED 16" Double Ring Ceiling Light with Microwave Sensor, model RENO-CLD-16"-BN-MW-MCCT-MS-G2, is specified at 16/22/30W, 5-CCT. Order Code: R31034. For an office or commercial interior, this model can be considered where the installation needs a coordinated linear ceiling layout. The fixture layout should suit the actual room or site. For a coordinated linear ceiling layout, compare the 1,275/1,900/2,550 lm output with the light already in use instead of treating wattage as a brightness rating.

Position this model around the actual work or circulation route and verify the mounting points before preparing the electrical connection. For electrical planning, 120V is the stated supply requirement for this model. The 2.7K/3K/3.5K/4K/5K colour selection lets the installer coordinate the light with surrounding fixtures instead of committing the whole space to one fixed tone. At 16/22/30W selectable power, the installer can choose the appropriate operating level after considering the layout and the required illumination. For adjustable light levels, use a dimmer suitable for this dimmable model and the connected load.

For RENO-CLD-16"-BN-MW-MCCT-MS-G2, refer to the manufacturer’s specification sheet and installation instructions for the detailed dimensions and installation requirements.

Buying tip: Check the fixture footprint against the existing ceiling box and the area covered by the previous fixture.