Reno LED 24-inch Decorative Vanity fixture

The Reno LED 24" Decorative Vanity fixture, model RENO-V2B-MW-MCCT, is specified at 14/18/25W, 3-CCT. Order this version under R32010. For a hallway or reception wall, this model can be considered where the installation needs illumination coordinated with the wall layout. The fixture layout should suit the actual room or site.

Use the mounting arrangement specified for this model, with adequate space for its body and electrical connection. The 120V supply specification must match the circuit serving this model. The 3K/4K/5K colour selection lets the installer coordinate the light with surrounding fixtures instead of committing the whole space to one fixed tone. The 14/18/25W power settings allow output to be selected for the layout; use the lower or higher setting according to the task, not a fixed rule for room names. For adjustable light levels, use a dimmer suitable for this dimmable model and the connected load.

For RENO-V2B-MW-MCCT, refer to the manufacturer’s specification sheet and installation instructions for the detailed dimensions and installation requirements.

Buying tip: Check the mounting location, junction-box position and the direction the light will fall before selecting the fixture.