Reno AIM LED 1x4 Indirect Curved Panel

The Reno AIM LED 1x4 Indirect Curved Panel, model RENO-14BPID-DV-MCCT-MW, is specified at 25/30/40w, 3-CCT. Order this version under R35121. A meeting room may call for general light across the occupied area. Compare this model with the physical layout and the required light distribution before selecting the fixture count.

For this model, coordinate the 1x4 panel footprint with the ceiling support system and the selected mounting hardware. Plan the electrical connection around this model’s 120-347V rating. The 3.5K/4K/5K colour selection lets the installer coordinate the light with surrounding fixtures instead of committing the whole space to one fixed tone. The 25/30/40w power settings allow output to be selected for the layout; use the lower or higher setting according to the task, not a fixed rule for room names. Use the 0-10V control interface for dimming; the power circuit alone does not provide the separate dimming signal.

For RENO-14BPID-DV-MCCT-MW, refer to the manufacturer’s specification sheet for the detailed dimensions and installation requirements.

Buying tip: Measure the ceiling grid opening and confirm the mounting method. Verify the nominal and actual dimensions when replacing a metric fixture.