This white LED downlight provides ceiling lighting for homes, offices, hallways and retail interiors. Each light uses 10W at 120V AC and delivers 800 lumens with a 120° beam and CRI 80+. Select 2.7K, 3K, 3.5K, 4K or 5K to match the room.
This retrofit light installs into 4-inch recessed cans. An E26 medium-base socket adapter and retaining hardware connect the LED assembly to a suitable existing recessed housing. Remove the existing lamp and trim, attach the adapter, connect the quick connector and seat the light as shown in the installation manual. The recessed housing is separate; this is not a direct-to-drywall spring-clip panel.
The aluminum light has a white ridged baffle trim. Overall size is 132.5 mm in diameter by 64.7 mm high. Verify the housing fit, socket position and retaining arrangement before ordering. These fixture dimensions are not ceiling-cutout instructions.
TRIAC dimming is supported down to 5% with a compatible dimmer. Set the colour-temperature selector before completing installation. Use the included electrical components; additional rough-in plates and extension cords are not required for the described retrofit installation.
For indoor wet locations. The light is IC rated and airtight with IP54 protection. Rated life is 50,000 hours, operating temperature is -20°C to 40°C, and the manufacturer warranty is 5 years. Follow the complete installation instructions and disconnect power before installation or maintenance.
| GTA Delivery Only | No |
|---|---|
| Brands | Ortech |
| Color Temperature | 2.7K/3K/3.5K/4K/5K |
| CRI | 80+ |
| Dimmable | YES |
| Life Hours | 50000 |
| Wattage | 10W |
| Lumens | 800 lm |
| Voltage | 120V AC |
| Operation Temp. | -20°C to 40°C |
| Color | White |
| MPN ( Part No.) | OLT2-410-5CCTWH |
| Beam Angle | 120° |
| Rating | Wet Location |
| Pack Quantity | 1 |
| Warranty | 5 Years |
| Feature | Fits 4-inch recessed cans; E26 adapter included; IC rated; airtight |
| Length | 132.5 mm |
| Height | 64.7 mm |
| Width | 132.5 mm |